Same-week pole sets ยท Sacramento, CA

Construction Camera Systems

Pole-mounted cameras that watch copper, tools and stored material overnight, with remote viewing on your phone. Call (916) 237-3494 for a free estimate.

Quote for Construction Camera Systems

A dispatcher calls back during office hours, 7am to 7pm daily.

Several security cameras grouped on a white pole by shrubs at a Sacramento job site

Camera Poles for Sacramento Construction Sites

Theft on construction sites usually happens after dark and on weekends, when nobody is around to see a truck back up to the material pile. Copper wire, transformers, tools, water heaters and appliances waiting for install are the items that tend to go missing. A camera pole on site does two things: it makes the site a harder target, and it gives you recorded video if something happens.

Our systems mount a cluster of cameras on a single pole so one setup can watch several directions at once. We aim them at the gate, the material storage area and the buildings where finishes or wire are going in. The cameras record to a local unit and can be viewed from a phone or laptop, so the superintendent can look in at night without driving back out to the site.

Power comes from the temp pole when one is on site. On sites with no power yet, a small generator or a solar setup can run the cameras for a while. Remote viewing needs a connection, and most customers pair the cameras with our Job Site WiFi kit so the video uploads on the same network the trailer uses.

Camera Placement That Fits How the Site Is Laid Out

A camera in the wrong spot records a lot of nothing. We walk the site before we set the pole and look at where vehicles enter, where material is staged and where the dark corners are. On a tract job in Natomas that may mean covering the model homes and the lot where appliances are stored. On a mid-rise downtown it may mean watching the loading entrance and the hoist.

Lighting matters too. Cameras with infrared see in the dark at close range, but a wide yard needs light to get usable color video at night. When the site is large, we often set a pole next to one of our Light Tower Rental units so the cameras have something to see. The Sacramento construction power company crew that set your pole can usually add the cameras in the same visit.

Where Site Cameras Pay for Themselves

Most of our camera rentals go to sites with valuable material sitting out overnight. These are the setups where builders and superintendents ask for them.

Copper During Rough Electrical

Spools of wire and coils of copper pipe are worth the most when they are stacked on site waiting to be pulled. That stretch of the job is when theft risk peaks.

Appliances in Finished Homes

Ranges, refrigerators and water heaters delivered to a subdivision before closing can disappear in one night. Cameras that cover the street side of a row of homes help protect them.

Yards Near Freeway Exits

Warehouse and logistics sites near I-5, I-80 and Highway 99 have quick access for anyone with a truck. A visible camera pole at the gate makes the site less inviting.

Progress Records for Owners

Owners and lenders like to see the job without a site visit. Time-lapse captures from the same camera give a record of each week of work.

How a Camera Pole Gets Installed

  1. Walk the Perimeter

    We walk the fence line and the material areas with you and decide what each camera should cover. Gates, storage containers and the main building entry usually come first.

  2. Set the Pole

    The pole goes in where it can see the most with the fewest blind spots. We keep it out of the path of equipment and away from areas due for excavation.

  3. Aim and Power the Cameras

    Each camera is aimed and focused, then connected to power from the temp pole or a generator. We check the night view before we leave so there are no surprises the first evening.

  4. Set Up Remote Access

    We connect the recorder to the site network and give you and your team access from a phone or laptop. You decide who can view and who can download clips.

  5. Move the Pole as the Job Changes

    When the site moves from grading to framing to finishes, the risk moves too. We can shift the pole or re-aim cameras to follow the work.

Camera Details for Valley Job Sites

Night and Fog Performance

Tule fog in December and January cuts visibility for everyone, cameras included. Infrared helps at close range, and nearby site lighting helps the rest. We position cameras to cover the most valuable areas from a short distance.

Summer Heat and Sun Glare

In July the cameras face full sun for hours. We aim them to avoid looking straight into the morning or evening sun, which washes out the picture, and we check that housings stay sealed against dust from graded pads.

Recording and Storage

Video records to a local unit on the pole, with clips that can be saved and shared if something happens. How long footage stays on the unit depends on the number of cameras and the recording settings, and we can set it to match what you need.

Construction Camera Systems: Questions From Sacramento Crews

Do site cameras need a temp pole for power?

A temp pole is the easiest source, since the cameras plug into a receptacle on the panel. If there is no pole yet, a generator or solar and battery setup can run them in the meantime.

Can I watch the construction cameras from my phone?

Yes, as long as the system has an internet connection. Most customers pair the cameras with our cellular WiFi kit, and we set up viewing access for the people you choose.

How many cameras go on one pole?

It depends on the site. A residential lot may need only a few cameras on one pole. A large yard or a multi-building site may need several poles. We plan it on the site walk.

Will the cameras work in winter fog?

Fog cuts camera range the same way it cuts your own. Cameras still see well at short distances, especially with infrared and site lights. We aim them at the gate and storage areas so the most important views stay close.

Other equipment we deliver

  • Temporary Power Poles

    Meter-ready temp poles set, wired and grounded for SMUD, PG&E and Roseville Electric hookups.

  • Job Site WiFi

    Cellular WiFi for site trailers and plan tables, set on a mast and powered off your temp pole or generator.

  • Towable Generator Rental

    Trailer-mounted diesel generators sized for job sites, shutdowns and events, delivered and connected by our crew.

  • Light Tower Rental

    Diesel and LED light towers for early pours, night shifts, winter evenings and event parking lots.

  • Spot Cooler Rental

    Portable spot coolers for hot buildings, server rooms, events and crews working through Sacramento summers.

Give us the site address, what has to run and the day you need it. We will put a crew on the board.

Call (916) 237-3494